Atomium HPFP 100

Atomium HPFP 100

Regular price £19.99 Save £-19.99
/

Only 10000 items in stock!

Designed for application on High-pressure fuel pumps (HPFP), Common rail systems, Pump injectors of diesel engines with a working volume no less than 5 L.

FEATURES

Lubricant Composition Atomium  HPFP is designed for the treatment of High-pressure fuel pumps (HPFP), Common rail systems, Pump injectors of diesel engines with a working volume no less than 5 L.

The treatment to be made in 2 stages.

For the treatment use calculation in running hours (moto-hours): for generators and other stationary equipment 1 running hour = 50 km of run, for wheel tractors (and equipment) 1 running hour = 10 km of run, for a caterpillar special equipment 1 running hour = 5 km of run.

Precautions: Not harmful if applied correctly.

First aid:

  • In case of contact with skin remove the material wash out with warm water, and then wash again with soap.
  • In case of contact with eyes wash out eyes with a large amount of water.
  • In case of swallowing consult a doctor.

APPLICATION MODE

The 1st stage: Pour Lubricant Composition Atomium  HPFP in a full fuel tank (but no more than 50-55 liters of diesel fuel in a tank) at the rate of 1 ml of the lubricant on 1 L of diesel fuel. Drive till complete fuel depletion in the fuel reservoir (before the indicator shows the minimum fuel rest). Make refueling without adding Atomium  HPFP, then run 2000-3000 km till the 2nd stage.

The 2nd stage: Pour Atomium  HPFP in a full fuel tank (but no more than 50-55 liters of diesel fuel in a tank) at the rate of 1 ml of Suprotec on 1 L of diesel fuel. Drive till complete fuel depletion in the fuel reservoir (before the indicator shows the minimum fuel rest). Then make regular refueling.

Important notes:

  • Before applying Atomium  HPFP shake the can thoroughly until natural sediments (active components) are totally dissolved.
  • After applying Atomium  HPFP drive the vehicle for no less than 20 minutes in any mode (regular operation).
  • It is recommended to carry out Atomium treatment of the fuel systems together with engine processing at the same time or sequentially.
  • It is not recommended to apply the lubricant at the existence of mechanical breakages of diesel injectors (the belts of injectors cannot be restored).
  • Atomium  HPFP is compatible with any type of diesel fuel.
  • To provide an optimal level of technical condition of the fuel system it is recommended to apply Atomium  HPFP every 30 000 - 40 000 km of run.

EFFECTS OF APPLICATION

  • Restores working parameters (pressure) of high-pressure fuel pumps, Common rail systems, Pump injectors of diesel engines (as a result of optimization of spacings in conjugated friction parts);
  • Significantly decreases noise and vibration levels in HPFP;
  • Increases of a lifetime of the HPFP, Common rail systems, Pump injectors in 1.5 – 2 times (due to wear intensity decreasing);
  • Increases engine effective power (as a result of fuel combustion quality improvement,);
  • Decreases fuel consumption by 3-5 % (as a result of compression recovering and combustion quality improvement);
  • Decreases exhaust CO/CH emissions up to 50 % (as a result of improvement of combustion quality)